Happy Chinese New Year!
Our office will be closed Feb 1–8 and will reopen on Feb 9.
Polar 1880A 1.8m 1H XP600/i3200E/i3200A Printheads HOSON board
XP600
Unit cost
GTQ 28,000.00
/set
Wholesale discounts
Quantity
Discount
Price per unit
1
0%
GTQ 28,000.00
Options
Por Favor Eliga el Tipo Por Favor Eliga el Tipo
Total Cost
GTQ 28,000.00
Amount
/set
1
| Printhead | XP600 |
DX7 |
DX5 |
i1600A1/E1 |
i3200A1/E1 |
|
| Printspeed | 3 pass | - | - | - | 15m²/h | 30m²/h |
| 4 pass | 10m²/h | 12m²/h | 12m²/h | 10m²/h | 20m²/h | |
| 6 pass | 7m²/h | 8m²/h | 8m²/h | 7.5m²/h | 15m²/h |
|
Especificaciones：
| Modelo | PL-1880A | |||||
| Cabezal | ||||||
| 1800mm | ||||||
| Prinhead | xp600 | DX7 | DX5 | i1600A1/E1 | i3200A1/E1 | |
| 3 pasadas | - | - | - | 15m²/H | 30m²/H | |
| 4 pasadas | 10m²/H | 12m²/H | 12m²/H | 10m²/H | 20m²/H | |
| 6 pasadas | 7m²/H | 8m²/H | 8m²/H | 7.5m²/H | 15m²/H | |
| Tinta | Tipo | |||||
| Capacidad | 4 Colores, 220ml cada una | |||||
| Media | Grosor | 1.5mm a 8mm ajustable | ||||
| Maximo peso del rollo | 75KG | |||||
| Tipo | ||||||
| Pre calentador y post calentador (puede ser controlado por separado) | ||||||
| Recolector de material | ||||||
| Sistema de secado | Sistema de secado | |||||
| Interface | USB 2.0(480m/s) | |||||
| Software RIP | MaintopV5.3、Photoprint、Seeget、Torpaz、Wasatch、Onyx | |||||
| AC 110V±10%、AC220V±10%、50/60±1Hz | ||||||
| Ambiente operacional | Temperatura: 20°C~35°C; Humedd: 35%RH~65%RH | |||||
| 600W | ||||||
| L2837mm*W455mm*H1300mm | ||||||
| L2870mm*W820mm*H500mm | ||||||
| Peso Neto | 125KG | |||||
| Peso | 185KG |
|||||
 |
|
| Tarjeta Madre | |
 |
 |
| Tarjeta Senyang | |
| Control de Temperatura | |
 |
 |
| Temperatura fija, sin posibilidad de ajuste. | |
| Sistema de Rebobinado (Media Take-up Device) | |
 |
 |
| Dispositivo de baja velocidad de 24V. | |
| Sistema de Secado | |
 |
 |
| Ventilador de secado de 150W. | |
 |
 |
| Motor paso a paso. | Servomotor de alta velocidad. |
| Tanque Principal de Tinta | |
 |
 |
| Capacidad baja de almacenamiento en cartuchos y suministro de tinta inestable. | |
 |
 |
Install the tripod:
Component Names:
1.Main Body
2.Paper Feeding System
3.Dryer
4.Iron Legs
5.Crossbeam
6.Support Fixing Plate
7.Leg Frame
8.Paper Collecting System
Leg Frame Installation:
1.Install the left and right base feet at the bottom ends of the left and right iron legs, and secure them using 8 inner hex bolts (M5×10). Attach the casters with brakes to the left and right base feet using 16 inner hex bolts (M5×10).
Note: Tighten in the direction of the arrow, as shown in the diagram.
2.Install the tie rods and crossbeam between them and secure with 22 inner hex bolts (M5×10), as shown in the diagram.
For all the outdoor advertising prints on light box,bill board,high way,vehicle,buildings.
